TP-Link Archer C54 User Manual page 32

Chapter 4
3. Enter other parameters if the ISP offers. The
and is the same as the LAN IP address of the router.
4. Click SAVE.
Note:
To use the DHCP server function of the router, you must configure all computers on the LAN as
automatically.
• To reserve an IP address for a specified client device:
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
section.
3. Click Add in the Address Reservation
4. Click VIEW CONNECTED DEVICES
IP for. Then the MAC and IP Address
the MAC and IP address
• To check the DHCP client list:
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced >
You can see the device information of the list.
3. Click Refresh to see the current attached devices.
> Network > DHCP Server
section.
and select the you device you want to reserve an
will be automatically filled in. You can also enter
of the client device.
Network > DHCP Server
Configure the Router in Wireless Router Mode
Default Gateway is automatically filled in
and locate the Address Reservation
and locate the DHCP Client List
Obtain an IP Address
section.
28