TP-Link Archer C54 User Manual page 14

Chapter 2
• Method 2: Wireless
1 ) Connect your device to the router's Wi-Fi using the SSID (network name) and
Wireless Password printed on the label at the bottom of the router.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
Note: If you are using a smart device, you can also scan the QR code to join the preset 2.4 GHz network
directly.
Computer
Connections are available
Wireless Network Connection
TP-Link_XXXX
Connect automatically
• Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB
network cards, can be connected to your router through this method.
Note:
• WPS is not supported by iOS devices.
• The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function
will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is
configured with the appropriate encryption before configuring the WPS.
1 ) Tab the WPS icon on the device's screen. Here we take an Android phone as an
example.
2 ) Immediately press the WPS button on your router.
3 Enter http://tplinkwifi.net
to log in.
<
OR
Connect
in the address bar of a web browser. Create a password
Connect to the Internet
Smart Device
Settings Wi-Fi
Wi-Fi
CHOOSE A NETWORK...
TP-Link_XXXX
Other...
WLAN
On
TP-Link
HomeNetwork
Close to
Office
TP-Link_123
TP-Link_ABC
MyHome
Test
10