TP-Link Archer C54 User Manual page 40

Chapter 4 Configure the Router in Wireless Router Mode
• Connects vis the Router's PIN
1. Keep the WPS Status as Enabled and select Router's PIN.
2. Enter the PIN on your personal device. You can use the default PIN or generate a new
one.
Note:
PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported
devices can connect to your router with the PIN. The default PIN is printed on the label of your router.
Method 2: Using the device's WPS button
Click Start on the screen. Within two minutes, press the WPS button on your device.
A Device-(XX-XX-XX-XX-XX-XX) Connected message should appear on the screen
and the LED should change from blinking to solid on, indicating successful WPS
connection.
Note:
XX-XX-XX-XX-XX-XX is the MAC address of your device.
Method 3: Using the router's WPS button
Press the router's WPS button, then enable WPS on your personal device within 2
minutes.
36