Printer Problems - Dell Dimension 2350 Owner's Manual

I
F T H E P O W E R L I G H T I S G R E E N A N D T H E C O M P U T E R I S N O T R E S P O N D I N G
"Diagnostic Lights" on page 54.
I
F T H E P O W E R L I G H T I S B L I N K I N G G R E E N
key on the keyboard or move the mouse to resume normal operation.
I
F T H E P O W E R L I G H T I S O F F
• Reseat the power cable into both the power connector on the back of the computer and the
electrical outlet.
• If the computer is plugged into a power strip, ensure that the power strip is plugged into an
electrical outlet and that the power strip is turned on.
• Ensure that the electrical outlet is working by testing it with another device, such as a lamp.
• Bypass power protection devices, power strips, and power extension cables to verify that the
computer turns on.
• Ensure that the main power cable is securely connected to the system board (see page 74).
• Ensure that the front panel cable is securely connected to the system board (see page 74).
• If the problem persists, contact Dell (see page 100).
E
L I M I N A T E I N T E R F E R E N C E
computer can cause interference. Other causes of interference are:
• Power extension cables
• Keyboard and mouse extension cables
• Too many devices on a power strip
• Multiple power strips connected to the same electrical outlet

Printer Problems

NOTE: Dell does not cover the printer's warranty. If you need technical assistance for your
printer, call the printer's manufacturer. See the printer documentation for the correct phone
number.
C
H E C K T H E P R I N T E R D O C U M E N T A T I O N
troubleshooting information.
E
N S U R E T H A T T H E P R I N T E R I S T U R N E D O N
button information.
46
So l vi n g Pro b l em s
— The computer is in standby mode. Press a
— The computer is either turned off or is not receiving power.
— Electrical appliances on the same circuit or operating near the
— See the printer documentation for setup and
— See the printer documentation for power
— See