Digital Temperature - Omegasonics OMG-1420BTD Operation & Instruction Manual

Digital Temperature

Knowing Your Temperature Controller
Operation
 The temperature controller is factory set at 150˚F.
 To change the Set Value, lightly press the up or down arrows Pressing and holding
down either arrow key will change the displayed value rapidly.
 Upon changing the Set Value, this lower display will flicker indicating the new value
is not set. To make this value permanent, press the RETURN Key
 Experience shows that the optimum ultrasonic cleaning temperature for most
applications is 120˚F - 160˚F.
 When ready to activate the heat, turn the selector switch marked HEAT to the ON
position.
 PV: This upper display indicates the
actual Process Value (or current
temperature) of the bath and cannot
be changed manually.
 SV: The lower display indicates the
Set Value or desired bath
temperature. This Set Value is
adjustable.
 ALM 1: If this light is on, it means
that the machine is currently heating.
It will shut off once the desired
temperature has been reached.
 OUT: If this light is on, it means that
the bath temperature is out of the
preset range of 50˚F - 160˚F. There
is a 5˚ hysteresis which means that
the heating mechanism (and the
OUT light) will go on/off based on a
5˚ variance. This protects the life of
the motor contactor.
 AT, ALM 2: Omegasonics use only.
 Return Key
.
6