Husqvarna 131R Workshop Manual page 38

3. Remove the clamp (B) from the clutch drum
housing. Do not remove the screw (A). Use pliers to
remove the large snap ring (C). Remove the bushing
(D). Use pliers to remove the small snap ring (E).
E
4. Remove the clutch drum (F). Use pliers to remove
the large snap ring (G). Remove the bearing (H).
G
38 - Repair instructions
C
B
D
A
F
H
8.10.5 To assemble the clutch drum
1. Attach the bearing (H). Attach the large snap ring
(G). Attach the clutch drum (F).
G
2. Attach the small snap ring (E). Attach the bushing
(D). Attach the large snap ring (C). Attach the clamp
(B) to the clutch drum housing.
E
3. Attach the clutch drum assembly with the 4 screws.
F
H
C
B
D
A
675 - 002 - 23.04.2018