Smartech WBC-200 Operator's Manual page 5

Wire size must be large enough for the AC ampere rating of charger, as
specified below:
Length of cord (feet)
AWG* size of cord
*AWG-American Wire Gauge
How to install the handle? Please follow the instructions.
When you take the charger out from the package, the handle is uninstalled.
To install the handle, first remove the clamp storage panel by pulling up-
wards on it, then use a thin, durable tool (i.e. a screwdriver) to depress the
two buckles at the bottom of the handle. Once depressed, push the handle
down until the buckles click into their groove. Once finished, remember
to put the clamp storage panel back on. If you want to store the charger,
simply press down the buckles once more and push handle downward into
the bottom most position.
WBC-200
25 50
18 16
100 150
14 12
USER'S MANUAL PAGE 5