Installation
1) Align Docking Station mounting holes with the hole pattern on mounting device. Using the
four (4) M4 0.7 x 20mm Pan Head Screws (Hardware Kit Item 3), four (4) Washers, M4
(Hardware Kit Item 4), and four (4) Lock Washers, M4 (Hardware Kit Item 5), secure the
Docking Station to device. Torque screws to 20 in-lbs (2.3Nm) ± 10%
A) Havis Desktop Stand installation (sold separately, Part # DS-DA-218).
B) In-Vehicle mounting system installation (not included).
Washer, M4
Lock Washer, M4
M4 x 0.7 x 20mm
Pan Head Screws
Desktop Stand
(VESA 75 mm)
Washer, M4
Lock Washer, M4
M4 x 0.7 x 20mm
Pan Head Screws
Mounting Device
(Not included)