Removal Of Antenna - Denso MOVINCOOL Climate pro k18 Service Manual

Removal of Antenna

1. Follow step 2, 3, 4, and 7 in "Removal of Panels" section.
2. Remove the four (4) wires of the antenna from
the communication module in the control box.
3. Remove the two (2) M4 x L10 screws from underneath the top panel to detach antenna from the
top panel.
Note:
Do not try to remove antenna wires from the antenna housing, this may cause damage to the
antenna module.
Top Panel
Communication Module
Antenna
Antenna Wires
Antenna Wires
31
Wire of Antenna (4)
Screw (2)
M4 x L10
Antenna