Electrical Connection; Mounting The Hood - KKT KOLBE DRAFT865 User Manual

Installation / Mounting the hood

8.6 Electrical connection

!
Only connect the appliance to the po-
wer supply once it is properly installed.
!
Never install the appliance if the data
on the rating plate (V) does not agree
with your supply voltage.
You will find the rating plate inside the
appliance, behind the grease filter.

9. Mounting the hood

Note: The ventilation system has
sharp edges. Use safety gloves.
The mounting time is 1-3 hours and
there are 2 people required
for assembly.
If the extractor hood is fitted with a
standard connector plug, connect this
to an easily accessible standard socket.
!
If the appliance is not fitted with a con-
nector plug, a two-pole switch, confor-
ming to standards with a minimum open
contact gap of 3 mm is to be installed by
an authorized tradesman in an easily ac-
cessible location.
• Before mounting, all appropriate core
holes for the installation of the ex-
haust hose must be present or made.
• Select the installation position so that
the appliance can be easily connected
to the power supply.
• Please get an exhaust hose ø 150 mm
with two hose clamps (not inclu-
ded!)
35