Subscribe to Our Youtube Channel
Related Manuals for Jetson Loomis
Summary of Contents for Jetson Loomis
- Page 1 Loomis Electric Scooter A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODEL SKU: JLOOMS-GRY...
- Page 3 Jetson's top two riding rules: Be safe. Have fun!
-
Page 4: Table Of Contents
Contents Safety Warnings ........................4 Warranty Coverage . - Page 5 ......................4 1 4.2 Riding the Loomis .
-
Page 6: Safety Warnings
Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Failure to use correct charger can result in fire and explosion, resulting in property damage, injury, and death. •... -
Page 7: Disposal Of Used Battery
• WARNING – Risk of Fire, No User Serviceable Parts MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from the Jetson Care Team. This will void any warranty, and can lead to malfunctions which may cause injury. -
Page 8: Warranty Coverage
Your new Jetson product is warranted against defects in materials and workmanship as indicated on ridejetson.com/ warranty for a period of time from the date of original retail purchase when used in accordance with Jetson's user manuals (refer to ridejetson.com/support). Under this warranty, you will be able to direct your claims to Jetson even in situations where you purchased the Jetson Product from one of our authorized retailers. -
Page 10: About Your Product
1. About Your Product Product Overview 1. HANDLEBAR* 3. fOLDING HOOK* 10. BATTERY cHARGING PORT WITH cOVER A. E-BRAKE 4. fOLDING LATcH 11. LED LIGHTS B. BELL 5. fRONT fORK 12. REAR WHEEL c. AccELERATION THUMB THROTTLE 6. fRONT WHEEL 13. - Page 11 *RIDER VIEW *RIDER VIEW NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
-
Page 12: Product Specs
Product Specs · PRODUcT DIMENSIONS, UNfOLDED : 36.8˝ (L) × 16.9˝ (W) × 40.3˝ (H) · PRODUcT DIMENSIONS, fOLDED: 36.8˝ (L) × 16.9˝ (W) × 18.9˝ (H) · DEcK SIZE: 18.0˝ (L) X 6.0˝ (W) · WEIGHT LIMIT: 220 LB ·... -
Page 13: Online Resources
Online Resources Scan for our most updated Loomis onboarding materials and support resources. -
Page 15: Getting Started
2. Getting Started Starting Notes · KIcK Off YOUR ADVENTURE RIGHT: PRIOR TO USE Of THIS PRODUcT, cAREfULLY READ THE ENTIRE USER MANUAL, INcLUDING SAfETY WARNINGS. MAKE SURE YOU UNDERSTAND, AccEPT, AND ADHERE TO ALL: • MANUfAcTURER’S REcOMMENDATIONS. • SAfETY INSTRUcTIONS AND WARNINGS. •... -
Page 16: Assembling The Handlebar
Assembling the Handlebar 1. PROP THE ScOOTER BASE UP ON ITS KIcKSTAND. (SEE SEcTION 3.8) IMPORTANT: HANDLE THE SEMI-ATTAcHED STEM WITH cARE. TAKE cARE NOT TO TUG OR TANGLE THE WIRING. 2. LOOSEN AND REMOVE THE PRE-INSTALLED cENTER BOLT (M6 X 12MM) ON THE STEM BASE WITH THE HEAD DIREcTLY ABOVE THE DEcK BY TURNING IT cOUNTERcLOcKWISE WITH THE 5MM ALLEN KEY. - Page 17 3. cAREfULLY RAISE THE STEM SO IT IS POSITIONED VERTIcALLY ABOVE THE HANDLEBAR STEM BASE BASE SUcH THAT THE fOLLOWING cONDITIONS ARE MET: • THE SIDE Of THE HANDLEBAR WITH THE AccELERATION THROTTLE IS ON THE RIGHT SIDE Of THE ScOOTER AS VIEWED fROM THE RIDING POSITION. •...
- Page 18 5. REINSERT THE REMOVED BOLT THROUGH THE ALIGNED HOLES IN THE STEM cLAMP AND STEM BASE BY TWISTING IT IN cLOcKWISE. fULLY TIGHTEN THE BOLT WITH THE 5MM ALLEN KEY. cENTER BOLT 5MM ALLEN KEY STEM cLAMP STEM BASE (INSIDE; NOT VISIBLE)
- Page 19 6. TIGHTEN THE TWO BOLTS ON THE LEfT SIDE Of THE STEM cLAMP BY TURNING THEM cLOcKWISE WITH THE 5MM ALLEN KEY. STEM cLAMP SIDE BOLT 5MM ALLEN KEY...
-
Page 20: Front Wheel
7. cHEcK THAT THE STEM IS SEcURE ON THE ScOOTER BASE AND THAT THE fRONT WHEEL ROTATES IN ALIGNMENT Of THE ROTATION Of STEM THE HANDLBEAR. ScOOTER BASE fRONT WHEEL... -
Page 21: Charging The Battery
Charging the Battery NOTE: IT cAN TAKE APPROXIMATELY 6 HOURS TO BRING THE BATTERY TO fULL cHARGE. fULLY cHARGE THE BATTERY PRIOR TO fIRST USE. 1. cONNEcT THE cHARGING cABLE WITH THE cHARGER. 2. PULL OPEN THE cHARGING PORT cOVER ON YOUR ScOOTER. 3. -
Page 22: Important Charging Notes
IMPORTANT CHARGING NOTES: · ONLY USE THE INcLUDED cHARGER OR ONE OBTAINED DIREcTLY THROUGH JETSON LABELED WITH fcA135-252010 (JETSON MODEL PJLOOM-cH). FAILURE TO USE CORRECT CHARGER CAN RESULT IN FIRE AND EXPLOSION. · PLUG THE cHARGER INTO THE WALL OUTLET BEfORE PLUGGING INTO THE cHARGING PORT ON THE ScOOTER. -
Page 24: Features And Functions
3. Features & Functions UNfOLDED Folding & Unfolding the Scooter WHEN TO FOLD: fOR STORAGE AND TRANSPORT WHEN TO UNFOLD: fOR RIDING IMPORTANT: DO NOT LIfT THE ScOOTER BY THE HANDLEBAR. TO TRANSPORT IT, SEcURE IT IN THE fOLDED POSITION AND cARRY IT BY THE STEM. fOLDED... - Page 25 TO FOLD: 1. PUSH THE TAB ON THE fOLDING LATcH UP, THEN PULL THE LATcH OPEN AND AWAY fROM THE STEM. STEM fOLDING LATcH...
- Page 26 2. LOWER THE STEM DOWN OVER THE DEcK. STEM DEcK...
- Page 27 3. PUSH THE fOLDING HOOK cATcH DOWN UNTIL IT LOOPS AROUND THE fOLDING HOOK. 4. cHEcK THAT THE ScOOTER IS SEcURE IN THE fOLDED POSITION. HANDLEBAR fOLDING HOOK LOOP fOLDING HOOK IMPORTANT: If THE fOLDING HOOK cATcH IS NOT ALIGNING WITH THE HOOK OR LOOPING AROUND IT, IT MAY BE NEcESSARY TO ROTATE THE cATcH MEcHANISM ON THE...
- Page 28 ADJUSTING THE CATCH MECHANISM INCORRECT: fOLDING HOOK cATcH IS NOT ALIGNED WITH THE fOLDING HOOK. ROTATE THE BELL cLAMP AS NEcESSARY AROUND THE HANDLEBAR UNTIL THE fOLDING HOOK cATcH IS BELL cLAMP PROPERLY POSITIONED TO "cATcH" THE HOOK. fOLDING HOOK cATcH fOLDING HOOK...
- Page 29 CORRECT: THE fOLDING HOOK cATcH IS PROPERLY ALIGHED TO "cATcH" THE HOOK.
- Page 30 TO UNFOLD: 1. PUSH THE fOLDING HOOK cATcH AWAY fROM THE REAR fENDER TO RELEASE IT fROM THE fOLDING HOOK. fOLDING HOOK cATcH fOLDING HOOK...
- Page 31 2. RAISE THE HANDLEBAR TOWARDS THE HANDLEBAR fRONT Of THE ScOOTER UNTIL THE STEM IS fULLY UPRIGHT. STEM...
- Page 32 3. fORcEfULLY PUSH THE fOLDING LATcH AGAINST THE STEM UNTIL IT cLIcKS cLOSED STEM "cLIcK" fOLDING LATcH...
- Page 33 4. cHEcK THAT THE STEM IS SEcURE IN THE VERTIcAL POSITION.
-
Page 34: Powering On & Off
Powering On & Off TO POWER ON: PRESS AND HOLD THE POWER BUTTON fOR 1 SEcOND. TO POWER OFF: PRESS AND HOLD THE POWER BUTTON fOR 3 SEcONDS. TO PRESERVE BATTERY POWER, YOUR ScOOTER HAS AN AUTO-Off fEATURE AND WILL AUTOMATIcALLY POWER Off AfTER 10 MINUTES WITHOUT USE. - Page 35 BATTERY cHARGE INDIcATOR LIGHT (SEcTION 3.4) SPEED MODE INDIcATOR LIGHT (SEcTION 3.3)
-
Page 36: Using Speed Modes
Using Speed Modes THERE ARE 3 SPEED MODES, EAcH Of WHIcH ALLOWS YOU TO RIDE A DIffERENT MAXIMUM SPEED. WITH THE ScOOTER POWERED ON, QUIcK-PRESS THE POWER BUTTON TO cHANGE SPEED MODES. SPEED MODE MAXIMUM SPEED SPEED MODE INDICATOR LIGHT (S) PEDESTRIAN MODE (SLOW) UP TO 5 MPH cOMfORT MODE (MIDDLE) -
Page 37: Checking Battery Charge Level
Checking Battery Charge Level YOU cAN KEEP TABS ON YOUR BATTERY’S cHARGE LEVEL BY LOOKING AT THE BATTERY cHARGE INDIcATOR LIGHT ON THE DEcK. IMPORTANT: WHEN THE BATTERY cHARGE DEPLETES TO 0%, THE ScOOTER WILL POWER Off. cHARGE THE ScOOTER TO fULL POWER (SEcTION 2.3) PRIOR TO YOUR NEXT RIDE. -
Page 38: Using The Led Lights
TO CONNECT YOUR HANDHELD DEVICE TO THE SCOOTER'S BLUETOOTH® SPEAKER: 1. POWER ON THE ScOOTER. (SEcTION 3.2) 2. IN THE SETTINGS SEcTION ON YOUR HANDHELD DEVIcE, ENABLE BLUETOOTH AND LOOK fOR "LOOMIS" IN THE LIST Of OPTIONS. SELEcT IT. 3. PLAY MUSIc THROUGH YOUR fAVORITE APP, AND IT WILL STREAM THROUGH THE ScOOTER'S SPEAKERS. -
Page 39: Using The Bell
Using the Bell USE THE BELL AS AN ALERT TO OTHER RIDERS AND PEDESTRIANS. TO SOUND THE BELL, fLIcK THE fOLDING cATcH HOOK DOWN AND RELEASE IT QUIcKLY. BELL fOLDING cATcH HOOK... -
Page 40: Using The Kickstand
KIcKSTAND Using the Kickstand TO USE THE KIcKSTAND, PIVOT IT DOWN AND GENTLY TILT YOUR ScOOTER ONTO IT TO STAND. TO RAISE THE KIcKSTAND, PIVOT IT BAcK UP. IMPORTANT: ALWAYS RAISE THE KIcKSTAND BEfORE RIDING. -
Page 42: Making Moves
4. Making Moves Using the Brake PUSH DOWN ON THE E-BRAKE GENTLY TO SLOW DOWN. PUSH MORE fORcEfULLY TO cOME TO A cOMPLETE STOP. IMPORTANT: TO AVOID ABRUPT MOVEMENTS, TRY TO ENGAGE THE E-BRAKE GRADUALLY. E-BRAKE... -
Page 43: Riding The Loomis
Riding the Loomis THIS SCOOTER'S MOTOR REQUIRES KICK-MOTION ACTIVATION TO START. 1. PLAcE ONE fOOT AT THE fRONT Of THE DEcK fAcING fORWARD. PROPEL THE ScOOTER fORWARD BY PUSHING Off THE GROUND 2 TIMES IN A ROW WITH YOUR OTHER fOOT. -
Page 44: Maximizing Speed & Riding Range
Maximizing Speed & Riding Range THE HARDER THE MOTOR NEEDS TO WORK, THE fASTER YOUR BATTERY WILL DRAIN. IN IDEAL cONDITIONS, THE MAXIMUM MILEAGE THAT cAN BE AcHIEVED PER BATTERY cHARGE IS 8 MILES AND THE MAXIMUM SPEED IS 15 MPH. THE fOLLOWING fAcTORS WILL ALSO AffEcT SPEED AND RIDING RANGE. -
Page 45: Safe Journeying
5. Safe Journeying Pre-Ride Safety Checks cONDUcT THESE IMPORTANT SAfETY cHEcKS BEfORE EVERY JOURNEY: BRAKE MAKE SURE THE BRAKE WORKS PROPERLY SUcH THAT: · THE E-BRAKE ENGAGES EASILY AND BRINGS THE ScOOTER TO A STOP. FRAME · cHEcK THAT THE ScOOTER fRAME IS NOT DAMAGED, BENT, OR BROKEN. ·... -
Page 46: Helmet Safety
Helmet Safety A HELMET SHOULD BE WORN BY THE RIDER AT ALL TIMES. PROPER POSITIONING: IMPROPER POSITIONING: THE fOREHEAD IS cOVERED THE fOREHEAD IS EXPOSED. BY THE HELMET. A fALL cOULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. -
Page 47: Care & Maintenance
· DO NOT DISASSEMBLE THE ScOOTER OR ITS BATTERY. · If THERE ARE ANY ISSUES WITH THE BATTERY, cONTAcT THE JETSON cARE TEAM. STORING THE LOOMIS · fULLY cHARGE THE BATTERY BEfORE STORING. THE BATTERY SHOULD BE fULLY cHARGED ONcE A MONTH DURING EXTENDED PERIODS WITHOUT USE. -
Page 49: Stay Connected
Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you! - Page 52 © 2024, TruRide Tech. ALL RIGHTS RESERVED. Manufactured for TruRide Tech LLC. JETSON® is registered trademark used under license from JetStream Brands LLC. No portion of this package, including shape, graphics, and design, may be reproduced or transmitted in any form or by any means.
Need help?
Do you have a question about the Loomis and is the answer not in the manual?
Questions and answers