King Industrial KC-1402FX Instruction Manual page 5

1. Rip fence. Use as a support guide for
ripping operations.
2. Rip fence 5" high facing. Dual
position face.
3. Main On/Off switch. The On/Off
switch has a locking feature. This
feature is intended to prevent
unauthorized use.
4. LED light switch.
5. Blade tension window.
6. Push stick and storage hook.
7. Upper hinged door.
8. Upper blade guide adjust wheel. The
upper blade guide assembly should be
lowered to just above the workpiece
while cutting. Always adjust and then
lock it by tightening the upper blade
guide lock knob before turning on the
bandsaw.
9. Upper blade guide assembly. The
blade guides support the blade and
prevent it from twisting during
operation. An adjustment is necessary
when the blade is changed or
replaced.
10. Flexible LED light.
11. Miter gauge. Used to push workpiece
towards blade or for miter cuts.
12. Cast-iron tilting table.
13. Rip fence rail with ruler.
14. Lower hinged door.
15. Belt tension adjustment knob.
16. Stand.
17. Blade tension indicator. Tension blade to proper tension based on blade width.
18. Upper blade wheel.
19. Tension adjustment knob. This feature controls the amount of blade tension. Proper blade tension is important to make accurate cuts.
20. Blade tension quick release lever.
21. Blade tracking lock knob and blade tracking adjust handle. This adjust handle should be adjusted to maintain proper blade tracking
and locked using the blade tracking lock knob.
22. Motor belt. Position of this belt determines the speed of the blade.
23. Lower blade wheel.
24. Motor.
25. Dust chute. This feature helps eliminate sawdust from inside the machine. This dust chute accepts 2", 3" and 4" dust collection hoses for
optimal sawdust removal.
Specifications
MODEL
Cutting capacity frame to blade
Maximum depth of cut
Table size
Table height from floor
Blade size
Motor
Amperage
Voltage
Speeds
Ass. dimensions (LxWxH)/weight
Pack. dimensions (LxWxH)/weight
gETTINg TO kNOW
YOUR 14" WOOD BANDSAW
kC-1402FX
14"
8-3/4"
21-3/8" x 15-5/8"
40-1/2"
100-5/8" x (1/8" - 1") x 0.025"
1 HP
9.5 Amp.
120V, 1 phase, 60 Hz
2 (1476, 3280) SFPM
33" x 22-3/4" x 67-3/4" / 166 lbs
50-7/8" x 22-7/8" x 18-3/8" / 170 lbs