Condenser Cleaning - Beverage-Air HBR Series Installation And Operating Instructions Manual

User Manual for HBR Refrigerators

CONDENSER CLEANING

Keeping the condenser coil clean is critical to efficient
operation.
1. Unplug unit from power supply.
CAUTION
2. Remove the single Phillips head screw at the top or
bottom of the panel depending on the model.
3. Lift upwards on the front panel to remove
4. Examine condenser surface, if dusty, brush and
vacuum the dust and lint from the surface of the
coil. Brush up and down to avoid damaging the fins.
Use care to not disturb the wires connected to the
controller.
Note: If the coil is greasy, the coil will need to be
cleaned with coil cleaner and that should be left to an
experienced technician.
5. Return panel to unit.
6. To reinstall the front panel line up the keeper screws
behind the panel and firmly pull downwards
7. Reinstall the Phillips head screw.
Note: Air filters are not recommended as they restrict
the flow of cooling air.
Rev. 08/20
Rotating fan blade can cause
personal injury.
Unplug unit from power supply
before beginning to clean
condenser
Condenser Surface
Push Panel Up to Release
From Screw Heads Behind
Panel
Beverage-Air
Beverage-Air
Remove Screw
17