15.
If you need to remove the microphone board from the display, disconnect the cable from the reverse ZIF
connector on the board (1), and then use a tool (2) to release the board from the computer (3).
The microphone board is available as spare part number M07208-001 and M07209-001 for the rear-
facing third microphone.
16.
If you need to remove the camera module:
Use a tool (1) to lift up evenly across the module and peel the module up from the display back
▲
cover (2), and then disconnect the cable from the reverse ZIF connector on the module (3). The
camera module is available as spare part number M07216-001 for RGB cameras and M08549-001
for IR cameras.
NOTE:
For installation, note that the cable routes under the camera module before it connects to
the module.
Component replacement procedures
69