Table of Contents
Advertisement
3.
Disconnect the antenna cables from the WLAN module (5) and disconnect the left display cable (6), and
then remove the cables from the clips along the side of the fan (7).
4.
Remove the six Phillips M2.5 × 4.0 screws (1) that secure the display assembly to the computer.
5.
Rotate the display to open the hinges (2).
6.
Separate the display assembly from the computer (3).
7.
If you need to replace display assembly subcomponents:
60
Chapter 6 Removal and replacement procedures for authorized service provider parts
Hide quick links:
Advertisement
Table of Contents
