4
Technical description of the burner
4.1
Models available
Designation
RX 500 S/PV
(*) FACTORY SETTING. To change the external modulation parameter it is necessary to access the password-protected list of parameters using the
AZL 21... display kit (page 48).
4.2
Burner categories - Countries of destination
Country of destination
BG, DK, EE, FI, HU, LV, NL, NO, SE
BE, CY, DE, HU, MT, NL, PL
AT, CH, CZ, ES, FR, GB, GR, IE, IS, IT, LT, PT, RO, SI, SK
4.3
Burner equipment
Flange for gas valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Valve fixing screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 4
Insulating screen and gasket . . . . . . . . . . . . . . . . . . . . . . . No. 1
Gas valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Instruction booklet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Spare parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Hardware for burner assembly:
M8 x 50 Stainless steel nuts (with or without point) . . . . . . No. 4
M8 x 16 Galvanised washers . . . . . . . . . . . . . . . . . . . . . . . No. 4
Toothed washers M8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 4
M8 Zinc-plated nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 4
20138630
Technical description of the burner
Voltage
230V - 50-60 Hz
DE, LU, PL
BE
Code
20136698
8
GB
External modulation (*)
3 points
Gas category
I2E
I2E(R)
I2H
I3P
II2H3P
Tab. A