Removal of Hygroscopic Fan Motor
4. Removal of Hygroscopic Fan Motor
Procedure
Step
1
Remove the nut and
remove the
hygroscopic fan.
Remove the 3 screws
2
of the motor cover.
3
Remove the motor
cover.
Remove the
4
hygroscopic fan motor.
12
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Nut
Hygroscopic
fan motor
Preparation
Remove the humidifying
rotor according to "Removal
of Heater Assembly /
Hygroscopic
Humidifying Rotor /
fan
Humidifying Rotor Motor".
Nut size: M6
(R13993)
When reassembling, align
the
fan with the D-cut section of
the motor shaft.
(R5822)
(R5824)
Motor cover
(R13994)
Si00-777
Points
10 mm
(R12236)
mark of the outdoor
Removal Procedure