Advertisement
Removal of Outer Panels / Fan Motor (Pattern 1)
1. Removal of Outer Panels / Fan Motor (Pattern 1)
Procedure
Step
1. Appearance features
2. Remove the panels.
Remove the screw of
1
the stop valve cover.
Pull down the stop
valve cover and remove
it.
2
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
(R15226)
(R16332)
Stop
valve
cover
(R7188)
Shield plate
Hook
(R16333)
Si011184
Points
Take care not to cut your
finger by the fins of the
outdoor heat exchanger.
The stop valve cover is
united with the shield plate.
When reassembling, make
sure to fit the 5 hooks.
Removal Procedure
Advertisement
