Removal Of Outdoor Fan / Fan Motor - Daikin RXN25KEV1B Service Manual

Removal of Outdoor Fan / Fan Motor

2. Removal of Outdoor Fan / Fan Motor
Procedure
Step
1. Remove the outdoor fan.
1 Remove the nut of the
outdoor fan.
Remove the outdoor
2
fan.
2. Remove the fan motor.
Disconnect the
1
connector for the fan
motor [S70].
2
Release the fan motor
lead wire from the hook.
Release the fan motor
3
lead wire from the 3
hooks.
4
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Mark
Nut
Outdoor fan
[S70]
D-cut
Shaft
(R17480)
Fan motor
Hook
lead wire
(R14491)
(R14492)
Si001161
Points
Preparation
Remove the panels
according to the "Removal
of Outer Panels".
Nut size: M6
10 mm
(R12236)
When reassembling, align
the mark of the outdoor
fan with the D-cut section of
the motor shaft.
[S70]: fan motor
When reassembling, set the
fan motor lead wire into the
hook.
When reassembling set the
fan motor lead wire into the
3 hooks.
Removal Procedure