Si061063
6. Removal of Fan Rotor / Fan Motor
Procedure
Step
1. Remove the fan rotor.
1
Remove the screw of
the bell mouth.
Turn the bell mouth
2
counterclockwise and
pull it out.
Remove the nut and
3
pull out the fan rotor.
Removal Procedure
Warning
Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Bell mouth
Fan rotor
Nut
Removal of Fan Rotor / Fan Motor
Points
Remove the suction grille
and electrical box according
to "Removal of Suction
Grille" and "Removal of
Electrical Box".
You can remove the fan
rotor and fan motor without
removing the electrical box.
(R11540)
Nut size: M6
(R11541)
D-cut
Shaft
(R11542)
10 mm
(R12236)
13