Bertazzoni MAST366QBXT Installation & User Manual page 8

/ Specifi cations
Burner Burner Injector Injector
diam.[mm]
Auxiliary 0.92
0.56
Semi-rapid 1.17
0.73
Rapid 1.55
0.98
Dual burner 0.80+1.30
0.50+0.83
See use and care manual for the layout of the surface burners of your rangetop
Cabinet Preparation
1. To ensure professional results, the cabinet and
countertop openings should be prepared by a
qualifi ed cabinet worker.
2. The clearances shown in fi gure are required.
3. The gas and electrical supply must be locat-
ed in an area that is accessible without requiring
removal of the cooktop. The appliance electrical
power cord and gas pipe connection are located
on the left rear.
• Prepare the fi nished opening for the rangetop
according to dimensions shown in the
illustration on the follows page.
• The platform must include a cut-out at the right
rear for electrical and gas supply connections.
It must be level to ensure the cooking surface
is level. Refer to the chart below for minimum
base support.
8
Pressure Pressure
Gas Gas
[iwc]
Type
4''
NG
10''
LP (Propane)
4''
NG
10''
LP (Propane)
4''
NG
10''
LP (Propane)
4''
NG
10''
LP (Propane)
Max Rate Max Rate Min Rate Min Rate
[Btu/hr] [W] [Btu/hr]
3,750 1,098 900
3,750 1,098 900
6,000 1,729 1,500
6,300 1,845 1,500
10,400 2,046 3,700
11,400 3,339 3,700
17,000 4,980 900
18,800 5,507 900
By-pass
By-pass
[W] diam.[mm]
264 Regulated
264 0.29
439 Regulated
439 0.37
1,084 Regulated
1,084 0.58
264 Regulated
264 0.29/0.65