Technical Data; Aqua-Stop Warranty - Siemens WN54A2A0HK Instruction Manual And Installation Instructions

J

Technical data

D imensions:
T e c h n i c a l d a t a
848 mm x 598 mm x 590 mm
(height x width x depth)
Weight:
80 kg
Mains connection:
Nominal voltage 220-240 V, 50 Hz
Minimum installation protection (c)10
A
Nominal power 1900-2300 W
Water pressure:
100–1000 kPa (1–10 bar)
r

Aqua-Stop warranty

O nly for appliances with Aqua-Stop
A q u a - S t o p w a r r a n t y
In addition to warranty claims against
the vendor based on the purchase
agreement and to our appliance
warranty, we will provide compensation
under the following conditions:
If water damage is caused due to a
1.
fault in our Aqua-Stop system, we
will compensate domestic
customers for the damage caused.
The liability guarantee is valid for the
2.
service life of the appliance.
It is a prerequisite of all warranty
3.
claims that the appliance with Aqua-
Stop must have been installed and
connected correctly in accordance
with our instructions; this also
includes a correctly fitted Aqua-Stop
extension (genuine accessories).
Our warranty does not cover
defective feed lines or fittings
leading to the Aqua-Stop connection
at the tap.
Appliances with Aqua-Stop do not
4.
need to be supervised during
operation, nor secured afterwards by
turning off the tap.
The tap only needs to be turned off if
you are away from home for a long
period, e.g. for several weeks'
holiday.
Technical data
en
55