Dell G5 5000 Service Manual page 26

Steps
1. Align the notch on the solid-state drive/Intel Optane with the tab on the M.2 card slot.
2. Slide the solid-state drive/Intel Optane into the M.2 card slot on the system board.
3. Replace the screw (M2x3) that secures the solid-state drive/Intel Optane to the system board.
NOTE: Enable the Intel Optane after you replace it. For more information about enabling the Intel Optane, see
Enabling Intel Optane.
Next steps
1. Install the left-side cover.
2. Follow the procedure in
26 Removing and installing components
After working inside your computer.