Dell G5 5000 Service Manual page 14

Steps
1. Lay the computer on the right side.
2. Disconnect the data and power cables from the hard drive.
3. Remove the cables from the routing guides on the hard-drive assembly.
4. Remove the screw (#6-32) that secures the hard-drive assembly to the chassis.
5. Lift the hard-drive assembly away from the chassis.
6. Remove the four screws (#6-32) that secure the the hard drive to the hard-drive cage.
7. Slide the hard drive from the hard-drive cage.
Installing the 3.5-inch hard drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the 3.5-inch hard-drive assembly and provides a visual representation of the installation
procedure.
14 Removing and installing components