Operation - Husqvarna PG 830S Operator's Manual

Hide thumbs Also See for PG 830S:
Table of Contents

Advertisement

Available languages

Available languages

Do not use the extension cable while it is wound up.
This can cause the extension cable to become too
hot.
Make sure that the extension cable is behind you
and the product when you use the product. This
prevents damage to the extension cable.
Safety devices on the product
WARNING: Read the warning instructions
that follow before you use the product.
Do not use a product with defective safety devices.
Do a check of the safety devices regularly. If the
safety devices are defective, speak to your
Husqvarna service agent.
Emergency stop button
The emergency stop button is used to quickly stop the
motor. The emergency stop button breaks the mains
power supply.
CAUTION: Do not use the emergency stop
button as the stop button for the product.
Introduction
WARNING: Before you operate the product,
you must read and understand the safety
chapter.
8
To do a check of the emergency stop button
1. Turn the emergency stop button (A) on the control
panel clockwise to make sure that the emergency
stop button is disengaged.
2. Turn the ON/OFF switch (B) on the control panel to 1
to start the motor. The LED adjacent to the ON/OFF
switch comes on.
3. Push the emergency stop button.
4. Make sure that LED adjacent to the ON/OFF switch
goes off.
5. Turn the emergency stop button clockwise to
disengage.
Safety instructions for maintenance
Keep all parts in good condition and make sure that
all fixtures are correctly tightened.
Do not use a product that is defective. Do the safety
checks, maintenance and the servicing as given in
this manual. All other maintenance work must be
done by an approved service agent.
Stop the product when you replace the diamond
tools. Turn the ON/OFF switch to 0 and push the
emergency stop button.
Do the inspection and/or maintenance with the motor
stopped and the power plug disconnected.
Do the maintenance to make sure that the product
operates correctly. Refer to
on page 17 .

Operation

To remove the product from the
package
WARNING: Move the product from the pallet
carefully and safely. The product is heavy
and can cause serious injury if it falls.
A
B
Maintenance schedule
1253 - 003 - 22.01.2020

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents