Debounce Time; Payment System Overriding Time; Duration Cool Air; Duration Warm Air - Miele PDR 507 EL Operating And Installation Instructions

Debounce time

In coin mode, the debounce time for
the minimum payment signal that
must be applied can be adjusted.
– Factory default: Short
For payment systems where the
falling coin generates the paid pulse.
– Long
For central control units on a 230 V
basis.

Payment system overriding time

Setting the transition signal for the
payment system. Security time margin
to prevent the payment system being
tampered with.
The transition time can be adjusted in
15-minute increments between 30–
240 minutes or switched off.
If the programme does not end within
the transition period, the setting in the
payment system is reset. The
programme is cancelled.
Factory setting: 180 minutes
Supervisor level

Duration Cool air

The programme running time can be
adjusted.
A time between 10 and 120 minutes
can be set in 5-minute increments.
Factory setting: 120 minutes

Duration Warm air

The programme running time can be
adjusted.
A time between 20 and 120 minutes
can be set in 5-minute increments.
Factory setting: 60 minutes

FOC programmes

In coin mode, you can decide whether
the Timed drying cool air programme
can be used for free.
– Factory setting: Off
– On
79