Reference To External Appliances; Setting The Display Brightness; Confirming The Time Query; Setting The Time Of Day - Miele PDR 507 EL Operating And Installation Instructions

Using for the first time
Reference to external
appliances
A reference to external hardware
appears.
With machine
switched off,

connect external
Information
hardware, then
switch on, or
select OK to
 Touch the  sensor to read all of the
continue
text in full.
 Confirm with the
If external hardware is to be
connected, connect the XCI box or
slide a communication module into the
slot on the back of the tumble dryer
before the initial commissioning. The
dryer must be disconnected from the
power supply for this process. Then
start the commissioning process.

Setting the display brightness


Brightness
–
 Set the desired brightness with the –
and + sensors and confirm your
selection with the
The display will change to the next
setting.
24
sensor.
OK
70
%
+
OK sensor.

Confirming the time query

Yes

 Touch the
If you select
OK
the time setting.
If you select
to the time setting.

Setting the time of day


Clock display
 Use the  and  sensors to enter the
time and confirm your entry with the
sensor.
OK
The display will change to the next
setting.
OK
Should the clock display not
be shown?
Yes or No sensor.
Yes , the system will skip
No , the display will switch
 
12
: 05
 
No
OK