Fimco PRO Series Owner's Manual

Model: LG-3025-PRO
(5302926)
(25 Gallon Professional ATV Boomless
Sprayer)
Professional Grade Pump (4.0 GPM): Ideal for Harsh
Chemicals & Oil Based Chemicals with Surfactants
Long Range 13" PRO SERIES Handgun
38' Horizontal Spray & 27' Vertical
Roundup® Ready
General Information
Thank you for purchasing this product. The purpose of this
manual is to assist you in operating and maintaining your lawn
& garden ATV sprayer.
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON, PLEASE CALL
1-800-831-0027
MONDAY-FRIDAY, 8:00 AM TO 5:00 PM CST
If you should have a question or experience a problem with
your Fimco Industries Product: Visit our website @
www.fimcoindustries.com or call the Toll free number above. Our
technical support representatives will be happy to help you.
In most cases a customer service rep. can resolve
the problem over the phone.
To obtain prompt, efficient service, always remember to give the
following information....
• Correct Part Description and/or part number
• Model number and Serial Number
Part descriptions and numbers can be obtained from the
illustrated parts list section(s) of this manual.
Retain a copy of your receipt for your unit, as it will be required
to validate any warranty service.
Warranted against manufacturer or workmanship defects from
date of purchase with copy of receipt:
Homeowner Usage: One Year.
Commercial Usage: 90 Days.
OWNER'S MANUAL
Technical Specifications

25 Gal. Corrosion-Resistant Polyethylene Tank

Pro Series 4.0 GPM, 45 PSI, 12 Volt Pump

30 Foot Spray Coverage w/Boom

Corrosion-Resistant Nozzles

Multi-Lid
Caution: When fully filled with water, this sprayer will
weigh 260 lbs.. Consult the owner's manual for your
vehicle to verify that you are within it's load carrying
capacity.
Assembly Instructions

Make sure the contents of the sprayer's carton match the
items shown on page 2 of the manual.

Follow the steps on pages 3, 4 & 5 to properly assemble
the sprayer.

After assembly is complete and before testing your spray-
er, make sure you connect the electrical hook-up to the end
of your pump and clip the clips to a fully charged battery.
The red wire must be connected to the positive (+) and the
black wire should be connected to the negative (-).

The drain plug assembly should already be attached to the
tank
www.fimcoindustries.com
1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049
Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440
[5194537 (02/20)]
Page 1