Download Print this page
Hide thumbs Also See for Pro Series:

Advertisement

Quick Links

'PRO SERIES' BOOM ASSEMBLIES (with Quick-Jet 'Diaphragm' Nozzles)
Model:
PRO-SERIES-21-QJD
(5301356)
6-Row Boom Assembly
General Information
Thank you for purchasing this product. The purpose of this
manual is to assist you in operating and maintaining your
Boom assembly.
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON, PLEASE CALL
1-800-831-0027
MONDAY-FRIDAY, 8:00 AM TO 5:00 PM CST
If you should have a question or experience a problem with
your Fimco Industries Product: Visit our website @
www.fimcoindustries.com or call the Toll free number above. Our
technical support representatives will be happy to help you.
In most cases a customer service rep. can resolve
the problem over the phone.
To obtain prompt, efficient service, always remember to give the
following information....
• Correct Part Description and/or part number
• Model number and Serial Number
Part descriptions and numbers can be obtained from the
illustrated parts list section(s) of this manual.
Retain a copy of your receipt for your unit, as it will be required
to validate any warranty service.
Warranted against manufacturer or workmanship defects from
date of purchase with copy of receipt:
Homeowner Usage: One Year.
Commercial Usage: 90 Days.
OWNER'S MANUAL
PRO-SERIES-28-QJD
8-Row Boom Assembly
Model:
(5301357)
WARNING:
user must read and understand the operator's
manual before using this product.
WARNING:
www.P65Warnings.ca.gov
Model PRO-SERIES-21-QJD Boom Assembly
(6 Row—21' Wide) (5301356)
Model PRO-SERIES-28-QJD Boom Assembly
(8 Row—28' Wide) (5301357)
Model PRO-SERIES-35-QJD Boom Assembly
(10 Row—35' Wide) (5301358)
www.fimcoindustries.com
1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049
Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440
[5004606
Model:
PRO-SERIES-35-QJD
(5301358)
10-Row Boom Assembly
PRO-SERIES-28-QJD (Shown)
To reduce the risk of injury, the
Cancer and Reproductive Harm.
(11/22)]
Page 1

Advertisement

loading

Summary of Contents for Fimco Pro Series

  • Page 1 Warranted against manufacturer or workmanship defects from date of purchase with copy of receipt: www.fimcoindustries.com 1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049 Homeowner Usage: One Year. Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440 Commercial Usage: 90 Days.
  • Page 2 • Cross-Over Folding • Tips/Caps/Strainers are Standard (Tips: ‘AIXR’ series) (Air Induction eXtended Range) • Fits all FIMCO Carriers • Square Boom Tube Construction • Diaphragm Check Valve Nozzles (QJD Models) (**) These tips provide excellent chemical and acid resistance with an exceptionally long wear life.
  • Page 3 Assembly 1. Mount the upright angles to the inside of the mounts on the carrier, using the supplied bolts and nuts. Attach the backrack to the upright angles using the square U-bolts and nuts. NOTE: The back rack can be mounted in either a high or low position and the uprights can be adjusted for desired height.
  • Page 4 Calibration Chemical labels may show application rates in gallons per acre, gallons per 1000 square feet or gallons per 100 square feet. You will note that the tip chart shows 2 of these rating systems. Once you know how much you are going to spray, then determine (from the tip chart) the spraying pressure (PSI) and the spraying speed (MPH).
  • Page 5 Spraying Solutions Other Than Water Since all the tabulations are based on spraying water, which weights 8.34 lbs. per USA gallon, conversion factors must be used when spraying solutions which are heavier or lighter than water. To determine the proper size nozzle for the solution to be sprayed, first multiply the desired GPM or GPA of solution by the rate conversion factor.
  • Page 6 Refill the tank about half full with plain water and use FIMCO Tank Neutralizer and Cleaner and repeat cleaning instructions above. Flush the entire sprayer with the neutralizing/cleaning agent, then flush out one more time with plain water. Follow the chemical manufacturer’s disposal instructions of all wash or rinsing water.
  • Page 7 PRO-SERIES BOOMS (QJD) Breakdown Detail A Detail B Detail D Detail C Detail E See Detail A Pro-Series-21 See Detail B See Detail D See Detail C See Detail A Pro-Series-28 See Detail B See Detail D See Detail C See Detail E Detail F See Detail A...
  • Page 8 PRO-SERIES BOOMS (QJD) Back Rack Detail Boom Stand Detail Opposite Side has typical hardware setup Spring Connection: Back Rack to 1st Outer Boom Assembly Page 8...
  • Page 9 PRO-SERIES BOOMS (QJD) Parts List Page 9...
  • Page 10 PRO-SERIES-QJD Nozzle Harness Parts List Pro-Series-21, -28, -35 QJD Center Nozzle Harness (#5277865) Pro-Series-21 QJD LH Nozzle Harness (#5277869) Pro-Series-21 QJD RH Nozzle Harness (#5277870) Pro-Series-28 QJD LH Nozzle Harness (#5277871) Pro-Series-28 QJD RH Nozzle Harness (#5277872) Pro-Series-35 QJD LH Nozzle Harness (#5277873) Pro-Series-35 QJD RH Nozzle Harness (#5277874) Ref.
  • Page 11 NOTES: Page 11...
  • Page 12: Warranty Info

    WHAT REMEDIES ARE AVAILABLE UNDER THIS LIMITED WARRANTY. If the conditions set forth above are fulfilled and the Equipment or any part thereof is found to be defective, Fimco, Inc. shall, at its own cost, and at its option, either repair or replace the defective Equipment or part.