Download Print this page

Fimco PRO Series Owner's Manual

65 gallon lawn & garden utv sprayer w/7-nozzle boom
Hide thumbs Also See for PRO Series:

Advertisement

Quick Links

General Information
Thank you for purchasing this product. The purpose of this
manual is to assist you in operating and maintaining your
UTV sprayer.
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON, PLEASE CALL
1-800-831-0027
MONDAY-FRIDAY, 8:00 AM TO 5:00 PM CST
If you should have a question or experience a problem with
your Fimco Industries Product: Visit our website @
www.fimcoindustries.com or call the Toll free number above. Our
technical support representatives will be happy to help you.
In most cases a customer service rep. can resolve
the problem over the phone.
To obtain prompt, efficient service, always remember to give the
following information....
• Correct Part Description and/or part number
• Model number and Serial Number
Part descriptions and numbers can be obtained from the
illustrated parts list section(s) of this manual.
Retain a copy of your receipt for your unit, as it will be required
to validate any warranty service.
Warranted against manufacturer or workmanship defects from
date of purchase with copy of receipt:
Homeowner Usage: One Year.
Commercial Usage: 90 Days.
OWNER'S MANUAL
Model: UTV-65-7-PRO (5303071)
(65 Gallon Lawn & Garden UTV Sprayer w/7-Nozzle Boom)
Professional Grade Pump (4.0 GPM):
Ideal for Harsh Chemicals & Oil
Based Chemicals with Surfactants
Long Range 13" PRO SERIES Handgun
38' Horizontal Spray & 27' Vertical
WARNING:
Cancer and Reproductive Harm.
www.P65Warnings.ca.gov
WARNING:
To reduce the risk of injury, the
user must read and understand the operator's
manual before using this product.
***IMPORTANT REMINDER***
This sprayer comes with an On/Off valve located on
your intake line. Make sure the valve is in the "open"
position before using this sprayer.
www.fimcoindustries.com
1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049
Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440
[5195263
Roundup® Ready
(10/22)]
Page 1

Advertisement

loading

Summary of Contents for Fimco PRO Series

  • Page 1 Warranted against manufacturer or workmanship defects from date of purchase with copy of receipt: www.fimcoindustries.com 1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049 Homeowner Usage: One Year. Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440 [5195263 (10/22)] Commercial Usage: 90 Days.
  • Page 2 Check Valve Strainers • Adjustable Boom Height • Pro Series 4.0 GPM, 45 PSI, 12 Volt Pump • Multi-Lid to accurately measure and pour chemicals CAUTION: When fully filled with water, this sprayer will weigh approx. 650 Lbs. Always check the vehicle load rating before using this sprayer. Do not exceed the recommended rating.
  • Page 3 Assembly Procedure Step 1 Step 2 Attach Hose Bracket to the top of the tank with (4) Phillips Thread Pressure Gauge into open port on manifold. Head Screws and insert the (2) Grommets into the hose Thread Multi-Lid on to tank. Step 3 Step 4 Lobe Knob...
  • Page 4 IMPORTANT: Remove tank lid and be sure the tank is clean and free of any foreign material. Rinse tank out of any tank residue before filling with water to test. Testing the Sprayer NOTE: It is VERY important to test this sprayer with plain water before actual spraying is attempted. This will enable you to check the sprayer for leaks without the possibility of losing any expensive chemicals.
  • Page 5 Drain and then refill half full, add the recommended amount of a good quality tank cleaner, such as FIMCO Tank Neutralizer and Cleaner. (If no tank cleaner is available, you may sub- stitute dish soap for this step, about 1-2 oz.
  • Page 6 Model: 5151073 Available Replacement Parts (Replacement Pump: 5281326) DON’T • • Clean and rinse your pump after each use with Fimco Tank Use to pump bleach. Neutralizer. • Use to pump petroleum products such as diesel fuel, • Winterize your pump or sprayer by rinsing, draining and gasoline or kerosene.
  • Page 7 Troubleshooting Check for loose wiring Low flow may cause pump to surge Make sure the ON/OFF switch is on Spray Wand is adjusted to small or fine of a Check the fuse spray pattern Pump Check for defective pressure switch Check for defective pressure switch will not run: Pump surges:...
  • Page 8 There is a shut-off valve on the intake line. It is at this location so you can shut off the flow of solution to access your system’s filter screen for clean- ing. Valve Valve “Closed” “Open” Filter Checking/Cleaning the sprayer’s filter/screen: ...
  • Page 9 Detail A Detail Boom Feeder Hose Exploded View UTV-65-7-PRO (5303071) Refer to Parts List Previous Page for Part Numbers See Detail B See Intake Detail On Page 10 Detail B Refer to Page 10 for the UTV intake assembly breakdown. Reference #5. Page 9...
  • Page 10 Part Numbers of the tank Intake Detail Long Range Pro Series Handgun • No Drip Shut Off • Easy Pull Trigger Handle • Chemical Resistant Construction • 38’ Horizontal Throw & 27’ Vertical Throw To adjust the spray pattern, the nut needs to be adjusted (Ref. A). Spinning it off, towards the lever, will make a cone pattern and spinning it on, away from the lever, will make a stream.
  • Page 11 Opposite Side has Typical Hardware Setup See Hinge Detail 7-Nozzle (Standard) Boom Assembly (with 3/8” Hose, 1” Sq. Tubing & AIXR11002VP Tips) Clamp Bag of 7: Hinge Detail 5277730 Elbow Cross • 110° wide, tapered flat spray angle with air induction tech- nology for better drift management Based on the minimum overlap required to obtain uniform •...
  • Page 12 Multi-Lid Directions 1. Open fill cap and place garden hose into tank. Fill tank to desired gallon marker, if marker is above the bottom of calibration container, stop before water reaches calibration container. This is done to help chemical mix better and keep foaming of chemical to a minimum later.
  • Page 13 NOTES: Page 13...
  • Page 14 WHAT REMEDIES ARE AVAILABLE UNDER THIS LIMITED WARRANTY. If the conditions set forth above are fulfilled and the Equipment or any part thereof is found to be defective, Fimco, Ind. shall, at its own cost, and at its option, either repair or replace the defective Equipment or part.

This manual is also suitable for:

Utv-65-7-pro5303071