Target 5 Shelf bookcase with doors BK5SHFWDEB Assembly Instructions Manual page 14

step 8.
Begin by installing all of the screws along one
edge of the back panel. Next, using a square
or tape measure, make sure that the cabinet is
square. (If using a tape measure, the distance
from one corner, diagonally to the other corner
should be the same in both directions.) Install
the remaining screws, starting with the corners.
(H5) x 45
5/8'' pan-head screw
1. Make sure the screws go through the pre-drilled holes properly.
2. Do not over tighten screws.
14
pre-drilled holes
hole for anti-tip strap
K
pre-drilled
holes
K2