Related Manuals for Target Made By Design 5 Shelf Bookcase - Espresso
Summary of Contents for Target Made By Design 5 Shelf Bookcase - Espresso
- Page 1 Made By Design™ 5 Shelf Bookcase - Espresso dpci 249-05-571 5 Shelf Bookcase - Natural dpci 249-05-572 >> assembly instructions 5V – PJS_A_01...
- Page 2 2. Use the carton as a working surface to prevent product damage during assembly. 3. Gather all tools prior to assembly. tools needed Manufactured by Friul Intagli Industries spa, via Oderzo 68, 33080 Villanova di Prata, Italy Imported and distributed by Target Corporation, 1000 Nicollet Mall, Minneapolis, MN 55403, USA Guest Services: 1-800-440-0680...
- Page 3 WARNING this product is intended for floor use only and not for wall mount use. Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip over: • Install tip-over restraint provided • Place heaviest items on the lowest surfaces as far back from the front edge as possible. •...
- Page 4 table of contents introduction hardware parts list how to use the cam lock system assembly 8-23 QUESTIONS? Just call 855-MYTGTHOME (1-800-440-0680) for parts and service. For faster service, have the DPCI number ready when calling.
- Page 5 hardware (H1) x 8 (H2) x 8 (H3) x 8 (H4) x 16 (H5) x 16 large cam metal dowel wooden dowel wedgefix dowel wedgefix housing (H9) x 1 (H6) x 4 (H7) x 40 (H8) x 1 support foot support foot nails nail guide...
- Page 6 ITEM DESCRIPTION QUANTITY top panel bottom panel right end panel left end panel back panel shelves D x1 C x1 E x1 Left side Right side Double (72.2 x 180.3cm) (29 x 182.9cm) (29 x 182.9cm) (29 x 182.9cm) (72.2 x 180.3cm) (29 x 18 A x1 F x4...
- Page 7 how to use the cam lock system 180°...
- Page 8 step 1. (H1) x 4 (H3) x 4 large cam wooden dowel 1. Carefully tap small wooden dowels (H3) into place. 2. Refer to page 6 for instructions on how to use the cam lock system.
- Page 9 step 2. (H2) x 4 metal dowel 1. Attach 4x metal dowels (H2) into the pre-drilled holes on side panels, screw-In cam bolts must be screwed down flush.
- Page 10 step 3. (H1) x 4 (H3) x 4 large cam wooden dowel 1. Carefully tap small wooden dowels (H3) into place. 2. Refer to page 6 for instructions on how to use the cam lock system.
- Page 11 step 4. (H2) x 4 metal dowel 1. Attach 4x metal dowels (H2) into the pre-drilled holes on top panel, screw-In cam bolts must be screwed down flush.
- Page 12 step 5. 180° 1. Attach bottom panel (B) onto side panels (C) and (D) as shown. Ensure metal dowels and wooden dowels are aligned correctly with the holes of matching parts before attaching. 2. Secure bottom panel (B) onto side panels (C) and (D) using screwdriver to turn fitting clockwise to fix. 3.
- Page 13 step 6. 180° 1. Attach top panel (A) onto side panels (C) and (D) as shown. Ensure metal dowels and wooden dowels are aligned correctly with the holes of matching parts before attaching. 2. Secure bottom panel (A) onto side panels (C) and (D) using screwdriver to turn fitting clockwise to fix. 3.
- Page 14 step 7. 1. Position back panel (E) as shown.
- Page 15 step 8. Y = J Y = J be ‘ 1. Before attaching the back panel (E), checking the correct allocation.
- Page 16 step 9. (H7) x 40 (H8) x 1 nail nail guide 1. Attach back panel (E) onto back side of the unit using 30x nails (H7), with the help of the nail guide (H8).
- Page 17 step 10. (H6) x 4 (H9) x 1 support foot support foot 1. Push in by hand 4x support foot (H6) on side panels (C) and (D) as shown. 2. Push in by hand 1x support foot (H9) on bottom panel (B) as shown.
- Page 18 step 11. 1. With help of an assistant carefully stand up the unit.
- Page 19 step 12. (H4) x 16 wedgefix housing 1. Push in by hand 4x wedgefix housing (H4) into the pre-drilled holes on shelves (F) as shown be carefully to the right alignment.
- Page 20 step 13. (H5) x 16 wedgefix dowel 1. Insert wedgefix dowels (H5) as shown. 2. Position the shelves (F) on the wedgefix dowels (H5) as shown. 3. Press firmily untill you don’t see the wedgefix dowels (H5).
- Page 21 step 14. For safest use of product all units should be secured to the wall with anti-tip hardware. If units are stacked or joined, it is required that units be secured to the wall with anti-tip hardware. (H10) x 1 (H14) x 1 L-bracket 3/8”...
- Page 22 step 15. (H12) x 1 plastic wall plug Wood. Masonry or brick. Cavity wall. Wood. Masonry or brick. Cavity wall. If fixing to wood Drill 5/16 inch diameter Drill 5/16 inch diameter If fixing to wood Drill 5/16 inch diameter Drill 5/16 inch diameter make sure that it pilot hole and 3/4 inch deep...
- Page 23 step 16. For safest use of product all units should be secured to the wall with anti-tip hardware. If units are stacked or joined, it is required that units be secured to the wall with anti-tip hardware. (H11) x 1 (H13) x 1 2”3/8 screw TC spacer...
- Page 24 © 2018 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
Need help?
Do you have a question about the Made By Design 5 Shelf Bookcase - Espresso and is the answer not in the manual?
Questions and answers