Slx 9030 Software Specifications; Ethernet; Leds - Extreme Networks ExtremeSwitching SLX 9030 Series Hardware Installation Manual

SLX 9030 Software Specifications

Software Specifications
Connector Options
Maximum MAC addresses
Maximum VLANS
Maximum ACLs
Maximum members in a standard LAG
Maximum per-port priority pause level
Maximum switches an mLAG can span
Maximum IPv4 unicast routes
Maximum IPv6 unicast routes
Maximum jumbo frame size
QoS priority queues (per port)

Ethernet

System component
QSFP-28 ports
SFP+ ports
10GBASE-T ports
Ethernet management port

LEDs

System component
Interface module LEDs
Power supply LEDs
ExtremeSwitching SLX 9030 Hardware Installation Guide
9035691-02 Rev AD
Description
Up to 80,000
4,096
2048
32
8
2
128,000
15,000
9,126 bytes
8
Description
The QSFP-28 ports can support 10Gb/25Gb/40Gb/100Gb
The SFP+ ports can support 1Gb/10Gb interfaces (SLX 9030-48S). User
port numbering is from left to right and top to bottom.
RJ-45 port with 1Gb/10Gb speeds (SLX-9030-48T) User port numbering is
from left to right and top to bottom.
RJ-45 port with 10Mb/100Mb/1Gb speeds
Description
• Power: Green - Power OK, off - No power
• Status: Green- Status OK, Amber - Error; Off - Unexpected error
• Link status (1 LED per physical port): Green (Solid) - Link is up; Green (Blinking) - Link is up and
running traffic; Off - No link
• LED 1 and LED 2: Steady Green - Input and output voltages are within range
• LED 1: Off and LED 2: Flashing Yellow - Power supply does not have incoming power and is not
providing power to the device, or the Input AC voltage is out of range.
• LED 1: Green and LED 2: Yellow - Output voltage is out of range
• 10/1 GbE SFP+
• 40GbE QSFP+
• 100GbE QSFP-28
• Out-of-band Ethernet management: 10/100/1000 Mbps RJ-45
• Console management:RJ45 serial port and USB type-C port with serial
communication device class support
• Storage: USB port, standard-A plug
LEDs
Maximum ports
supported
4
48
48
1
99