Logic Switches - RadioMaster TX16S User Manual

Name: Setting name
Unit: Units, switchable between normal and%
Precision: Precision, which can be used in decimal mode. You can set this mode
corresponding to the percentage.
Min: Minimum value, which can be limited when the value is changed
dynamically
Max: Maximum value, which can be limited when using dynamic change values
FM0-FM8: You can specify a value for each flight mode or set it to be the same as
the other flight modes. Press and hold the ENT key to switch the input value and
select the flight mode in this field. When editing a value, it will increment /
decrement by 1 or 0.1, depending on the "Precision" setting above.

4.4.8. Logic switches

The logic switch is a user-programmed virtual switch. Like the physical switch, the
logic switch is also a switch, but unlike the visible switch, which can be moved by hand,
the logic switch is an internal switch triggered by some conditions. The judgment
condition you set allows the remote control to automatically turn on or off the logic
switch to achieve a certain or a series of automated actions.
49