Updating The Software Via Usb - Waeco ASC5500G RPA Operating Manual

ASC5500G RPA
9.9

Updating the software via USB

The software is updated using a USB stick.
I
NOTE
The USB stick must be formatted with the FAT32 file system.
When updating the software, the following data is stored in the internal
memory of the station:
 the current software of the AirConServiceCenter
 the current database with all the common vehicle types and corre-
sponding filling quantities
You can update the software and the database separately.
1. Copy the current software on the USB stick.
2. Insert the USB stick in the USB port (18) and switch on the device.
✓ The station will scan the USB stick for a later version. If the software
on the USB stick is more up-to-date, the following menu is displayed:
If the database on the USB stick is more up-to-date, the following
menu is displayed:
The current version is displayed in black on the bottom line.
EN
18
New firmware release
found
ENTER upgrade STOP EXIT
AS5k0058
New database release
found
ENTER upgrade STOP EXIT
ldyf1701
Service tasks
125