Standby Menu - Waeco ASC5500G RPA Operating Manual

Initial start-up
✓ Afterwards the AirConServiceCenter runs a software test.
✓ Afterwards a leak test is performed.
✓ Once the start-up procedure is complete, the AirCon Service Center
displays the Standby menu:
I
NOTE
Ignore any error codes which occur during commissioning (see
page 131) and skip by pressing ENTER.
7.3

Standby menu

The standby menu shows you the current supply quantities and the time
settings of the AirConServiceCenter.
The following information is shown:
 Refrigerant quantity
 Fresh oil quantity
 UV additive quantity
 Time
 Date
84
Software test.
Please wait
Tightness test
Please wait
Refrigerant
PAG oil
UV tracer
11:56:35
ASC5500G RPA
g. XXXX
ml XXX
ml XXX
10/03/17
EN