Waeco ASC5500G RPA Operating Manual page 99

ASC5500G RPA
7. Confirm the new administrator code:
8. Use the cursor keys  or  to select the user:
9. Create the four-digit personal user code (once a code is created
here, the unit can then only be operated using this code).
10. Confirm the new user code:
I
NOTE
Use the yellow information button to switch between upper and lower
case.
11. Enter the correct user name, and then press ENTER to confirm:
I
NOTE
The user is created and the menu changes again to the user selection.
You can now create another user or exit the menu by pressing STOP.
EN
ADM AREA
Confirm new code
ADM AREA
User number
ADM AREA
User number
Insert new code
ADM AREA
User number
Confirm new code
ADM AREA
User number
User name
John Citizen
ADM AREA
User number
John Citizen
Operation
----
1
1
----
1
----
1
1
99