Language Selection; Setting The Font - Waeco ASC5500G RPA Operating Manual

ASC5500G RPA
7.4

Language selection

1. Press the cursor keys  or  to access the basic menu.
2. In the basic menu, use the cursor keys  or  to select "Other
selections":
3. Press ENTER to confirm.
4. Use the cursor key  to select "Service".
5. Press ENTER to confirm.
6. Enter the password "5264".
7. Use the cursor keys  or  to select the preferred language.
8. Press ENTER to confirm.
9. Press STOP. The language chosen is active and the standby menu
is displayed.
7.5

Setting the font

1. Press the cursor keys  or  to access the basic menu.
2. In the basic menu, use the cursor keys  or  to select "Other
selections":
3. Press ENTER to confirm.
4. Use the cursor key  to select "Service".
5. Press ENTER to confirm.
6. Enter the password "3667".
7. Use the arrow keys  or  to select the desired font:
– Unifont
– Mingliu
8. Press ENTER to confirm.
9. Press STOP. The language chosen is active and the standby menu
is displayed.
EN
Short selection
Free selection
Other selections
ENTER-OK
Short selection
Free selection
Other selections
ENTER-OK
PAR
Mingliu
Unifont
ENTER-OK
Initial start-up
FONT
85