Updating The Software Via Usb - Waeco AirCon Service Center ASC1100G Operating Manual

Service tasks
"Service completed" displays the amount of service work performed
using the air conditioning service unit since the last reset (see date).
9.7

Updating the software via USB

The software is updated using a USB stick.
I
NOTE
The USB stick must be formatted with the FAT32 file system.
When updating the software, the following data is stored in the internal
memory of the station:
 the current software of the AirCon Service Center
 the current database with all the common vehicle types and corre-
sponding filling quantities
You can update the software and the database separately.
1. Copy the current software on the USB stick.
2. Insert the USB stick in the USB port (9).
3. Switch on the unit.
106
Service completed:
Number
STOP-EXIT
15
ASC 1100G
07/03/20
4
EN