Lenovo ThinkSystem HR630X User Manual page 47

One blank line
USB hardware delays and time‐outs:
USB transfer time‐out
Device reset time‐out
Device power‐up delay
One blank line
Mass Storage Devices:
AMI Virtual CDROM0
1.00
AMI Virtual Floppy0 1.00
AMI Virtual HDisk0 1.00
© Copyright Lenovo 2017
#6 Disable
USB HS Disable/Ena
Physical ble
Connector
#7 Disable
USB HS Disable/Ena
Physical ble
Connector
#8 Disable
USB HS Disable/Ena
Physical ble
Connector
#9 Disable
1 sec/ 5 sec/ 10 sec /20
sec
10 sec /20 sec/30 sec/40
sec
Auto / Manual
Auto
Floppy
Forced FDD
Hard Disk
CD‐ROM
Auto
Floppy
Forced FDD
Hard Disk
CD‐ROM
Auto
Floppy
Forced FDD
BIOS or OS.
Enable/Disable this USB Physical Connector
(physical port). Once disabled, any USB devices
plug into the connector will not be detected by
BIOS or OS.
Enable/Disable this USB Physical Connector
(physical port). Once disabled, any USB devices
plug into the connector will not be detected by
BIOS or OS.
Enable/Disable this USB Physical Connector
(physical port). Once disabled, any USB devices
plug into the connector will not be detected by
BIOS or OS.
The time‐out value for Control, Bulk, and Interrupt
transfers.
USB mass storage device Start Unit command time‐
out.
Maximum time the device will take before it
properly reports itself to the Host Controller. 'Auto'
uses default value: for a Root port it is 100 ms, for a
Hub port the delay is taken
Mass storage device emulation type. 'AUTO'
enumerates devices according to their media
format. Optical drives are emulated as 'CDROM',
drives with no media will be emulated according to
a drive type.
Mass storage device emulation type. 'AUTO'
enumerates devices according to their media
format. Optical drives are emulated as 'CDROM',
drives with no media will be emulated according to
a drive type.
Mass storage device emulation type. 'AUTO'
enumerates devices according to their media
format. Optical drives are emulated as 'CDROM',
47