Lenovo ThinkSystem HR630X User Manual page 29

2.2.15 IN NSTALLING G OR REPL
Do not procee ed before reading g and understand
To remove a 2.5/3.5-inch hot-s swap drive, do th
1. Gently p push the release
2. Rotate and d pull the handle t to slide the drive
To reinstall, re everse the steps
Special Note: : Install the hot-sw wap drives into th
vacant hot-sw wap drive bays.
2.2.15 IN NSTALLING G OR REPL
Do not procee ed before reading g and understand
1. Slide the h ot-swap power su upply into the cha
2. Connect th he power cord.
LACING A H
ding the "Safety P
e following:
latch of the hot-s wap drive (See F
Pu ushing the release
out of the chassis
Remo
above.
he available bays
Order of insta
LACING A H
ding the "Safety P
assis until it snap
HOT‐SWAP DRIVE
Precautions" secti on of this chapte
Figure below) to o open the handle o
e latch of a 2.5/3. 5-inch hot-swap d
s.
oving a 2.5/3.5-inc ch hot-swap drive
in the order num mbered in the diag
llation for 2.5/3.5- -inch hot-swap dr
HOT‐SWAP POWER SU
Precautions" secti on of this chapte
s into position.
r and "Read Me F First".
of the drive.
drive
e
grams below. Inst tall dummy trays i
rives
UPPLY
r and "Read Me F First".
in all
29