Call Forward; Call Conference; Speed Dial - Yealink SIP-T29G Quick Start Manual

Semi-Attended Transfer
1. Press or the Transfer
2. Enter the number you want to transfer to, and then press
3. Press or the Transfer
Attended Transfer
1. Press or the Transfer
2. Enter the number you want to transfer to, and then press
3. Press or the Transfer

CALL FORWARD

To enable call forward:
1. Press the Menu soft key when the phone is idle, and then select
2. Select the desired forward type:
Always Forward----Incoming calls are forwarded unconditionally.
Busy Forward----Incoming calls are forwarded when the phone is busy.
No Answer Forward----Incoming calls are forwarded if not answered after a period of time.
3. Enter the number you want to forward to. For
ring time to wait before forwarding from the
4. Press the Save soft key to accept the change.

CALL CONFERENCE

1. Press or the Conference
2. Enter the number of the second party, and then press the
3. Press the Conference
conference.
4. Press the End Call soft key to disconnect all parties.
Note:
• You can split the conference call into two individual calls by pressing the

SPEED DIAL

To configure a speed dial key:
1. Press the Menu soft key when the phone is idle, and then select
2. Select the desired DSS key, and then press the
3. Select Speed Dial from the
the Label field and then enter the number in the
Save
4. Press the soft key to accept the change.
To use the speed dial key:
Press the speed dial key to dial out the preset number.
soft key during an active call. The call is placed on hold.
soft key when you hear the ring-back tone.
soft key during an active call. The call is placed on hold.
soft key when the second party answers.
No Answer
After Ring Time
soft key during an active call. The call is placed on hold.
soft key when the second party answers. All parties are now joined in the
Enter soft key.
Type field, select the desired line from the
Value field.
Yealink IP Phone – SIP-T29G
.
.
Features->Call Forward.
Forward, press or to select the desired
field.
Send soft key.
Split soft key.
Features->DSS Keys.
Account ID field, enter a label in
Quick Start Guide
9