Appendix B; Available Fonts And Barcodes - Datamax ST-3210 Operator's Manual

Available Fonts and Barcodes

All available character fonts and barcodes are listed below. The
selections will differ according to the Parser Mode. Depending upon the
mode, use either the DPL Programmer's Manual or the DTPL
Programmer's Manual for detailed information.
DPL Fonts
Fonts 0 through 8 use the slash zero (Ø) convention for distinguishing
between the zero and the alphabetic O (the slash can be removed with the
Z ticket-formatting command). These fonts are non-proportional
(monospaced): each character will take up the same amount of space
when printed.
Font 9 (Triumvirate) is a proportional font: each character will take up a
different amount of space when printed.
Font
0 32-127, 255
1 32-168, 171, 172, 225, 255
2 32-168, 171, 172, 225, 255
3 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153, 154,
156, 157, 165, 168, 225, 255
4 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153, 154,
156, 157, 165, 168, 225, 255
5 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153, 154,
156, 157, 165, 168, 225, 255
6 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153, 154,
156, 157, 165, 168, 225, 255
7 32-126
8 32, 48-57, 60, 62, 67, 69, 78, 83, 84, 88, 90
9 32-126, 128-169, 171-173, 181-184, 189, 190, 198, 199, 208-216,
222, 224-237, 241, 243, 246-250, 255
S-Class

Appendix B

Valid ASCII Characters
67