Keysight Technologies M9710A Configuration And Measurement Instructions page 8

89600 VSA Software Configuration
8
d. In the box below, ensure that the digitizer appears as the 'ADC' entry,
and if you have more than one digitizer connected - select the required
unit using the drop-down list (4).
e. You may either use the default name or specify another name for this ana-
lyzer configuration (5).
f. Click OK to close the 'New Hardware Configuration' dialog (6).
g. Before closing the 'Hardware Configurations' dialog, use the Current
Analyzer Configuration drop-down to select the newly created as the
current item ( Digitizer1 in the exemple below).
M9710A Hardware Extension of 89600 VSA Software