INSTALLATION OF THE BRACKET ONTO THE CROSSVENT VENTILATOR
(CONTINUED)
5. Apply Blue Loctite 243 on the four (4) 1/4-20 x
3/4 in. hexagonal screws.
6. Put the back plate onto the back of the ventilator.
7.
Using the four (4) 1/4-20 x 3/4 in. hexagonal
screws, attach the mounting plate to the back of
the ventilator.
8. Tighten all four (4) 1/4-20 x 3/4 in. hexagonal
screws.
9. Apply Blue Loctite 243 to the four 10-32 x 1/2 in.
hexagonal screws.
10. Place onto the main assembly.
11. Using the four 10-32 x 1/2 in. hexagonal screws,
secure the mounting plate onto the main
assembly.
Return To Table of Contents
18
Installation Guide
BP100 UG 202002-R01
www.technimount.com