Technimount System BRACKET PRO 100 Series User Manual page 19

INSTALLATION OF THE BRACKET ONTO THE CROSSVENT VENTILATOR
(CONTINUED)
12. While using a pair of pliers, hold each washer in
between the back plate and the ventilator while
tightening each screw. Do the same for all four
screws.
13. Back view of mount installed on the main
assembly.
14. It is now ready for transport.
15. Front view with mount installed on the Crossvent
ventilator
www.technimount.com
Installation Guide
BP100 UG 202002-R01
Return To Table of Contents
19