Table of Contents
Advertisement
Available languages
Available languages
Start-up
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2/CCU3. For detailed information, refer to
the Homematic IP User Guide, available for
download
www.homematic-ip.com.
To integrate the device into your system and to enable
control via the free Homematic IP app, you must teach-in
the device to your Homematic IP Access Point first.
To teach-in the device, please proceed as follows:
•
Open the Homematic IP app on your smart-
phone.
•
Select the menu item "Teach-in device".
•
After power supply is established, the teach-in
mode will be active for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (A)
briefly (see figure 9).
•
Your device will automatically appear in the
Homematic IP app.
•
To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.
Therefore, see the sticker supplied or attached to
the device.
50
in
the
download
area
of
Advertisement
Chapters
Table of Contents
