Avaya 4900 Series Manual page 51

10GBASE-CX specifications
The 10GBASE-CX is a 2-pair twinaxial copper cable that plugs into the SFP+ socket and connects
two 10-gigabit ports. The reach for this cable is up to 15 m with a bit error rate (BER) better than
-12
10 .
The 10GBASE-CX is a lower cost alternative to the optical SFP+ devices.
For more information about the 10GBASE-CX, including test and measurement information and
more specifications, see the IEEE 802.3–2012 standard. The following table identifies the part
numbers for specific cable lengths.
Table 26: 10GBASE-CX cables
Cable length
3 meter
5 meter
10 meter
10GBASE-ZR/ZW SFP+ specifications
The following table lists the transmit and receive specifications for the 10GBASE-ZR/ZW SFP+
transceiver. The part number of this SFP+ transceiver is AA1403016-E6.
Warning:
Risk of BER increase
For proper SFP+ transceiver operation, ensure that at least 11 dB of attenuation is present
between the transmit and receive ports.
The reach for this SFP+ transceiver is up to 70 km* at a wavelength of 1550 nm.
Table 27: 10GBASE-ZR/ZW SFP+ specifications
Parameter
Line rate (nominal)
Distance
Link optical power budget
Dispersion power penalty
Minimum attenuation between transmit and receive
ports
Transmitter characteristics
Center wavelength range
Average launch power
Optical modulation amplitude (minimum)
Extinction ratio (ER) (minimum)
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Part number
AA1403019-E6
AA1403020-E6
AA1403018-E6
Specifications
10GBASE-ZR 10.3125 Gbps ±100 ppm (10 GbE)
Up to 70 km *
24 dB
3.0 dB at 70 km (G.652 fiber)
11 dB
1530 to 1565 nm, nominal 1550 nm
0 to 4.0 dBm
–1.7 dBm
8.2 dB
Series
Comments on this document? infodev@avaya.com
SFP+ specifications
Table continues...
51