Avaya 4900 Series Manual page 20

SFP
Not all SFP transceivers or products support DDM.
Job aid
The following table describes the reach provided by various SFP transceivers. This table is
informational only — not all Avaya Ethernet switching and routing products support all the SFP
transceivers listed here.
Table 1: Supported SFP transceivers
Model
Important:
Avaya supports SFP transceivers with the following part numbers: AA1419013-E5, AA1419014-E5,
AA1419015-E5, and AA1419025-E5 to AA1419040-E5. However, Avaya strongly recommends using
the newer DDI versions of these SFP transceivers.
1000BASE-T SFP
1000BASE-SX SFP 850 nm LC
1000BASE-SX SFP 850 nm MT-RJ
1000BASE-LX SFP
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Description Part number
gigabit Ethernet, AA1419043-E6
RJ-45 connector
AA1419013-E5**
connector This transceiver
has reached end-
of-sale (EOS). For
more information
about EOS
transceivers, and
recommended
replacements for
your product, see
Locating end of
sale notices
page 11.
AA1419014-E5**
connector This transceiver
has reached end-
of-sale (EOS). For
more information
about EOS
transceivers, and
recommended
replacements for
your product, see
Locating end of
sale notices
page 11.
1310 nm LC AA1419015-E5**
connector This transceiver
has reached end-
Comments on this document? infodev@avaya.com
Minimum software version
ERS 5900
7.0
7.0
on
7.0
on
7.0
Series
ERS 4900
7.1
7.1
7.1
7.1
Table continues...
20