Hard Drive - HP ProBook 450 G7 Maintenance And Service Manual

Hard drive

Table 5-7 Hard drive, Hard Drive Hardware Kit, and hard drive bracket descriptions and part numbers
Description
Hard drive, 1 TB, 5400 rpm, 7 mm
Hard drive, 500 GB, 7200 rpm, 7 mm
Hard Drive Hardware Kit (includes hard drive cover and connector)
Before removing the hard drive, follow these steps:
1. Prepare the computer for disassembly
2. Place the computer in Battery Safe mode
3. Remove the bottom cover
4. Remove the battery
Remove the hard drive:
1. Release the ZIF connector (1), and then disconnect the hard drive cable from the system board (2).
2. Remove the two Phillips M2.0 × 4.0 screws (3) that secure the hard drive to the computer.
3. Lift the tab (4), and then use the tab to lift the hard drive from the bay (5).
44 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Battery Safe mode on page
(Bottom cover on page
(Battery on page 36).
33).
34).
Spare part number
832077-002
703267-002
L78776-001
33).